: Disable Power-saving mode (Sleep mode should be set to "Never") to prevent connection drops while printing. Setup and Installation Steps
Follow these steps to safely install the driver architecture on your server or host computer. Step 1: Download the Software
Sometimes things do not work on the first try. Here is what you should check if you get stuck: The PC Cannot Find the Flip Check your Wi-Fi network. Ensure both devices use the same network name. Restart your internet router. The Setup.exe File Will Not Open Right-click the file. Select . Turn off your antivirus software for five minutes. Printing Fails halfway Check the paper tray on your physical printer. Clear any stuck print jobs in your Windows print queue. Restart the Samsung Flip board. samsung flip printing software setupexe
Extract the contents to a local folder on your computer to find the Setup.exe file. Step 2: Run the Setup.exe
Windows 7 or higher (Windows 10/11 recommended). : Disable Power-saving mode (Sleep mode should be
Note the of the Windows host PC and the Port Number shown on the software dashboard. You will need this for the physical Flip board setup. Connecting the Samsung Flip to the Print Server
Visit the Samsung Display Solutions Portal or the main Samsung Support Download Center . Here is what you should check if you
: Once installed, you can print captures of the Flip's screen directly to physical printers connected to the network.
The Samsung Flip and the printer server PC must be on the same local network (LAN) . Confirm your PC's IP address, as you may need it for manual server configuration on the Flip display.
You will be prompted to define an SSL Port to secure communications between the Flip display and the computer server:
The download is typically handled by your IT department or available from Samsung's official websites. You'll be looking for the file .