Xycd60 Manual Link [hot]

Use the UP or DOWN buttons to toggle between Charging ( UP ) and Discharging ( dn ). Short press SET to confirm your choice.

: Enter the parameter setting interface (UP, dn, OP, dOP, FOP). UP Button :

can be found on Scribd or as a detailed product guide on IC Station .

Guards against undervoltage, overcharging, and over-discharge. Dimensions: Approximately 79 x 43 x 38mm. Manual & Setup Resources xycd60 manual link

Short press to turn the relay ON or OFF manually. Long press to enter the low-power sleep mode setup.

This link will never expire and is 100% safe from malware.

If you are looking to source this specific module or require assistance with , let me know. What battery chemistry and voltage are you planning to use with this module? Share public link Use the UP or DOWN buttons to toggle

Most XYCD60 dash cam versions do not have WiFi. The manual confirms it is a basic standalone unit. If your unit has “WiFi” printed on it, search for “RoadCam” or “SunInFun” app – but check your specific manual link first.

The (often referred to as the XY-CD60L) is a DC 6V–60V battery charge and discharge controller module designed to protect batteries (lithium or lead-acid) from overcharging and over-discharging. Manual & Resource Links

I've compiled a complete, standalone manual from these sources, including all the technical details, wiring diagrams, and button functions you need to get started. UP Button : can be found on Scribd

This mode prevents over-discharge, which can ruin battery cells. The relay closes (connects load) when voltage is above UP .

Prevents over-discharge. The battery connects to the input, and the load to the output. It shuts off the load when the battery hits the Lower Limit (dn) and reconnects when the voltage rises back to the Upper Limit (UP) . Key Specifications Operating Voltage: DC 6V–60V.