Locate the spirit level (bubble) near the platter. Adjust the four feet until the bubble is perfectly centered. An unlevel scale leads to inconsistent weight readings and "drift."
Calibration is a critical service procedure typically performed by a qualified technician. If you suspect the scale is inaccurate, follow these steps:
Store your SM500 in its original box or a padded case. Keep silica gel packets inside if you live in >60% humidity. The load cell’s worst enemy is not weight – it’s rust from condensation.
Press the corresponding Preset Key or enter the item’s PLU (Price Look-Up) number , then press Print to generate the label. Using the Tare Function Effectively
Thread the paper around the rollers following the diagram on the cassette. digi sm500 scale user manual exclusive
Use the alphanumeric keypad mapping to type the product name (e.g., "HONEY HAM").
Open the side printer cover and pull out the green thermal print head release lever.
Navigation usually involves specific key combinations to enter the "CAL" mode.
To maximize the lifespan of your Digi SM-500, implement a routine maintenance schedule: Locate the spirit level (bubble) near the platter
The scale will feed 2–3 labels to automatically detect the liner transparency and gap distance. 5. Network Configuration (Ethernet/IP Setup)
This guide focuses on providing an exclusive look into the operational nuances of the SM-500 to ensure your team is maximizing its capabilities. 2. Key Features & Specifications
Remove both the container and product. Press [TARE] again to clear the memory and reset the scale for standard open-platter weighing. Keyboard Pre-Programmed Tare
Press 1 on the keypad and hit [PRINT] . The scale will print an itemized receipt showing every PLU sold, total weights transferred, and accumulated revenue since the last reset. Generating a Z End-of-Day Clearing Report If you suspect the scale is inaccurate, follow
Satellites pull real-time pricing and send transactional logs back to the Master unit over the local network.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
A: Yes, the scale can receive data using the DIGIWTCP.exe utility. This is often used to send .DAT files directly to the machine, bypassing the official DIGI-Map and DIGI-Net software.
Copyright © 2025 PassMark™ Software
