However, like any precision instrument, the Evenheat Model 5320 is only as good as the operator’s understanding of its controls, safety protocols, and maintenance schedule. This article serves as your definitive replacement, covering everything from unboxing and electrical setup to advanced programming and troubleshooting.
Your Evenheat 5320 is a workhorse, but it is not a mind reader. Treat the manual as your mandatory pre-flight checklist. With it, your kiln will deliver thousands of perfect firings. Without it, you are firing blind.
Older versions of the 5320 utilize manual switches to control the current flowing to the heating elements.
Coat the tops of your kiln shelves with kiln wash to prevent accidental glaze or glass runs from permanently bonding to the shelves. Never apply kiln wash to the heating elements or brick walls.
: Center the kiln on its stand to ensure stability. Use metal shims if your floor is uneven, and check stability with both the lid open and closed.
The programming instructions below are for Evenheat's Set-Pro automatic controller . If your kiln has a different controller (like a Kiln Sitter), follow the specific manual for that component.
Ensure the kiln shelves and floor are properly coated with kiln wash.